null
AEM X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge

AEM X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge

(No reviews yet) Write a Review
$226.09
SKU:
aem30-0334

AEM's X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge (PN 30-0334) provides tuners who are using piggyback tuning modules or open source software with the ability to view AFR through the factory CAN-bus stream that is output by the factory ECU, and deliver the most accurate, safe and powerful tune. The 30-0334 X-Series OBDII Wideband Gauge is validated to work with EFILive, HPTuners and DashDaq software.

The X-Series Wideband AFR OBDII Gauge includes an OBDII pass-through connector and Bosch 4.9LSU sensor that can be free-air calibrated or used with the factory resistor calibration. Additional wiring for a 0-5v or RS232 Serial output can be added by the user for outputting to a data logger. This OBDII pass-through capability replaces the traditional AEMnet stream available in the 30-0300 X-Series Wideband AFR Gauge Controller.

OBDII CAN-bus OUTPUT
The OBDII output simulates an auxiliary ECU signal when plugged into a vehicle’s OBD port, which requires a unique address from the other ECUs already on a vehicle’s network. AEM’s default OBDII CAN address will work with most popular vehicles and adjustments should not be necessary. However, AEM has provided OBDII address programmability through the buttons on the gauge face if a different address other than the default address is required, allowing users to program ECU #, Parameter Identification (PID), Message Identifier, and Bit Rate.

PATENTED X-DIGITAL TECHNOLOGY – It’s The Fastest
X-Series Widebands are the fastest responding wideband air/fuel ratio controllers in independent testing against 17 other wideband UEGO air/fuel controllers.* The controller’s high speed, patented, X-Digital technology (Patent 9,575,030) ensures no loss of signal fidelity and full transient response, making it able to identify the slightest fluctuations in AFR and output them in full value.

WHY RESPONSE TIME MATTERS
Faster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM’s Wideband Controllers with X-Digital technology reduce deadtime and can improve the performance of your vehicle through more accurate AFR tuning.

FACTORY CALIBRATION RESISTOR OR FREE-AIR CAL, IT’S YOUR CHOICE!
X-Series Wideband Gauges and the X-Series Inline Controller support the popular Bosch 4.9LSU sensor, and can utilize both the factory calibration resistor and free-air calibration methods. This allows users to take advantage of the precise factory resistor calibration when a sensor is new but then allows for free-air calibrations if the user desires when the sensor ages.** It’s the perfect marriage of simplicity and accuracy!

WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER?
AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine.

WHY USE A WIDEBAND AIR/FUEL CONTROLLER?
Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned.

CAN I CHANGE THE AEM UEGO SENSOR’S CONNECTOR?
No. There is a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output.

* Independently tested at 360° Product Testing (results reported on August 31st, 2015) against 17 competitor wideband UEGO Air/Fuel Controllers. AEM X-Series Inline with Bosch 4.9LSU wideband sensor and AEM X-Series Wideband UEGO AFR Gauge with Bosch 4.9LSU sensor recorded the fastest response times.
** Wideband UEGO sensors are wear items and their lifespan is determined by many factors including contamination from leaded fuels, automotive fluids, particulates, mechanical or thermal shock and from being unheated and exposed to the exhaust stream. Free-air calibration may correct drift as a sensor ages, but it is recommended that they are replaced as part of your vehicle’s maintenance program. When performing free-air calibration, please follow the procedure outlined in the instruction manual.

Write a Review
This product hasn't received any reviews yet. Be the first to review this product!

Learn About Our Easy Returns

• Product Warranty
• Return policy
• International Orders
• Return Procedure
• Defective Items
• Restocking fees
• Non-Returnable Products
• Large Print Disclosures
• Returns FAQ
 
Warranty policy

All Warranties on this part are the Manufacturers. The Seller Unleashed Tuning LLC hereby expressly disclaims all warranties, either express or implied, including any implied warranty on merchantability or fitness for a particular purpose, and Unleashed Tuning LLC neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of the part. This disclaimer by the seller, Unleashed Tuning LLC in no way affects the terms of the manufacturers warranties.

Return policy

Parts  can only be returned within 30 days of purchase and must be accompanied by the original invoice. There is a 15% restocking fee on all returned parts and canceled orders that have been processed. No refunds on parts that have been Installed/used, Special order, Electrical parts, HPTuners credits, Custom vehicle calibrations or software. Freight charges are not refundable. No refunds after 30 days. We are not responsible for damage or loss in transit. 

To initiate a return, a Return Authorization Number (RA#) must be requested within 30 days of receipt of the product. When shipping the return, this RA# must be clearly labeled on the package. Items returned without an RA# are not eligible for refund or exchange.

Canadian Returns

Canadian Orders are eligible for a return or exchange subject to the above conditions. Eligible returns and exchanges will not be refunded the cost of shipping on the original order. Duties and taxes paid on the original order must be must be refunded through the Canadian Border Services Agency (CBSA). A link to the required B2G form and CBSA instructions to request a refund of duties and taxes is below. 

CBSA Duties and Taxes Refund

International Orders

International orders are not eligible for return or exchange, unless in the case of manufacturer defect or Unleashed Tuning error.

Return Procedure

1. Contact an Unleashed Tuning Customer Care Specialist at leslie@unleashedtuning.com

2. Our Customer Care Specialists will provide you with an RA#, and email you detailed return instructions.

3. Clearly write and/or affix the RA# on the package and return to the address specified in the email.

4. Unless the return is due to manufacturer defect or Unleashed Tuning error, the customer is responsible for return shipping costs. For your convenience, Unleashed Tuning offers discounted return shipping labels. Should you choose this option, the cost of the label will be deducted from the refund amount.

5. The original method of payment used to place the order will be credited the purchase price, excluding return shipping costs. Unleashed Tuning will send a confirmation email once the refund has been issued. Please allow 5-7 business days for your bank to process the credit.

Defective Items

If you receive an item that is broken or defective, Unleashed Tuning will provide a prepaid return shipping label. To obtain the return shipping label, follow the above return procedure.

Restocking Fees

There is a 15% restocking fee on all returned parts and canceled orders that have been processed. These items qualify for a refund, less the restocking fee and any return shipping costs, when returned with all original packaging, paperwork and parts in new and unused condition.

Non-Returnable Products

No refunds on parts that have been installed/used, Special order, Electrical parts, HPTuners credits, Custom vehicle calibrations or software. Freight charges are not refundable. No refunds after 30 days.

"Large Print" Disclosures

Authorized items must be returned with all original packaging, paperwork and parts in new and unused condition. Items not returned in the above condition will fail inspection and a refund will not be issued.

Unleashed Tuning may issue a refund in good faith prior to receiving the returned item. We reserve the right to rescind such refunds if the item fails inspection upon arrival.

Unleashed Tuning will not compensate for damages incurred during product installation or use, nor reimburse labor charges or installation fees, under any circumstances.

Returns FAQ 

• How do I return an item?
• Can I exchange an item?
• Will I have to pay a restocking fee?
• Who pays for return shipping costs?
• What should I do if I received the wrong item?
 
How do I return an item? 

Contact an Unleashed Tuning Customer Care Specialist at leslie@unleashedtuning.com. We will provide you with an RA#, which is required for all returns, and email you detailed return instructions.

Can I exchange an item?

Yes. Items that include all original packaging, paperwork and parts in new and unused condition may be returned for exchange. Simply follow the standard Unleashed Tuning returns procedure.

Will I have to pay a restocking fee?

There is a 15% restocking fee on all returned parts and canceled orders that have been processed. These items qualify for a refund, less the restocking fee and any return shipping costs. As with all returns, these items are subject to inspection before a credit is issued.

Who pays for return shipping costs?

If the return is due to manufacturer defect or Unleashed Tuning error, we pay for return shipping. Otherwise, the customer is responsible for the cost of returning the item. In this case, we encourage you to take advantage of our discounted return shipping labels. Ask your Customer Care Specialist for details.

What should I do if I received the wrong item?

First, verify whether the item you ordered is the item you actually received. Simply compare the part number on the shipping receipt to the part number on your email order receipt.

If the numbers do not match, we may have shipped the wrong part number. Just contact us at leslie@unleashedtuning.com. We'll process your return, exchange the item for the correct part (if available) and send you a prepaid UPS shipping label for your return item.

If the numbers do match, you may have ordered the incorrect part number. Once again, please contact us at leslie@unleashedtuning.com. We'll process your return and exchange the item for the correct part (if available).

 

Related Products

Customers Also Viewed

BRANDS WE TRUST