US Dollars
Edelbrock Perf RPM Cam and Lifters Kit Ford 289-302 - 7122
(No reviews yet)
Write a Review
Write a Review
Edelbrock Perf RPM Cam and Lifters Kit Ford 289-302 - 7122
$428.95
- SKU:
- EDE7122
- UPC:
- 85347071227
- Availability:
- This part is back-ordered therefore shipping time will vary.
- MPN:
- 7122
- Proposition 65:
WARNING: Cancer and Reproductive Harm- Special Order:
- Y
- CARB:
- This product is not CARB Legal and not for sale in California
NOTICE: Unleashed Tuning WILL NOT tune ANY vehicle that has emissions equipment removed. And we DO NOT sell custom tunes that disable emissions control equipment or aid in bypassing any emissions control systems. We also DO NOT sell tuning devices or custom tunes for vehicles located in California. Orders placed that violate this notice will be cancelled and refunded less a cancellation fee.
Edelbrock part #7122 Performer RPM Camshaft is designed for small-block Ford 289-302 V-8 applications. This Edelbrock cam kit produced 367 HP & 340 ft-lbs. of torque when used with #7121 intake and #60259 cylinder heads on a 302 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 224 degrees - Duration @ .050 Exhaust: 234 degrees - Lift @ Valve Intake: .496" - Lift @ Valve Exhaust: .520" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 11"
Edelbrock Perf Plus Cam and Lifters Kit Ford 289-302 - 2122
$321.95
Edelbrock Performer-Plus Camshaft #2122 is designed for 289-302 Ford V8 engines and produces optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with...
Edelbrock Torker Plus Cam and Lifters Kit Ford 289-302 - 5022
$419.95
Edelbrock part #5022 Torker-Plus Camshaft is designed for small-block Ford 289-302 V-8 applications. The camshaft works well with Torker II manifolds for performance from 2500 to 6500 rpm, this...
Edelbrock Perf RPM Cam and Lifters Kit Ford 351W - 7182
$426.95
Edelbrock part #7182 Performer RPM Camshaft is designed for Ford 351W V-8 applications. This Edelbrock cam kit produced 400 HP & 412 ft-lbs. of torque when used with #7181 intake and #60259...
Edelbrock Perf RPM Cam Lifters Kit Ford 429-460 - 7167
$423.95
Edelbrock part #7167 Performer RPM Camshaft is designed for Ford 429-460 V-8 applications. This Edelbrock cam kit produced 506 HP & 536 ft-lbs. of torque when used with #7166 intake and #60669...
Edelbrock Dual Quad Kit RPM Air-Gap 289-302 Ford - 2035
$1,796.95
The Edelbrock #2035 RPM Dual-Quad manifold and carb kit is designed for Small-Block Ford 289-302 applications. A huge hit among street rodders, this Dual-Quad Kits offer the ultimate set-up for...
Edelbrock Perf Plus Cam and Lifters Kit Ford 351W - 2182
$339.95
Edelbrock part #2182 Performer-Plus camshaft is designed for small-block Ford 351W V-8 applications. This Edelbrock cam kit produced 325 ft-lbs. of torque when used with #2181 intake and stock iron...
Edelbrock Perf Plus Cam and Lifters Kit Ford 429-460 - 2167
$368.95
Edelbrock Performer-Plus Camshaft #2167 is designed for 429-460 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer...
Edelbrock Manifold And Carb Kit Performer RPM Small Block Ford 289-302 Natural Finish - 2032
$966.95
The Edelbrock #2032 Single-Quad Manifold and carb kit is designed for Small-Block Ford 289-302 applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best...
Edelbrock RPM Air-Gap Dual-Quad Manifold for Small-Block Ford 289-302 - 7535
$494.95
Edelbrock part #7535 RPM Air-Gap Dual-Quad is designed for 289-302-347 c.i.d. small-block Fords. This is a dual plane intake manifold which combines dual four-barrel excitement with a well-mannered...