US Dollars
SPC Performance FRT CAM/CAS KIT-FORD/MER - 86140
$201.33
- SKU:
- SPC86140
- UPC:
- 082642861409
- Availability:
- This part is back-ordered therefore shipping time will vary.
- MPN:
- 86140
- Proposition 65:
WARNING: Cancer and Reproductive Harm- Special Order:
- Y
NOTICE: Unleashed Tuning WILL NOT tune ANY vehicle that has emissions equipment removed. And we DO NOT sell custom tunes that disable emissions control equipment or aid in bypassing any emissions control systems. We also DO NOT sell tuning devices or custom tunes for vehicles located in California. Orders placed that violate this notice will be cancelled and refunded less a cancellation fee.
Caster and camber adjustments can be made easily by installing this kit. By replacing the stock alignment washers on the upper control arm, caster and camber can be adjusted by turning the cam nuts to obtain the proper readings. These cam kits give you the full range of caster and camber adjustment and once installed make alignments quick and easy for the life of the vehicle. California Residents WARNING
SPC Performance REAR CAM/CAS KIT - 86680
$59.91
This rear camber kit replaces the bolt on the upper control arm near the wheel. The adjusting plate locks into existing holes in the rear knuckle assembly making this a very easy- to-use and time...
SPC Performance FRONT CAM/CAS KIT - 86640
$77.00
This new kit allows for easy adjustment of the lower control arm to make camber and caster changes. Uses the O.E. bolts with the new cams and adjusting plates to give you lifetime camber and caster...
SPC Performance CAS ADJ CAMS FORD 2WD - 87280
$47.56
This part (number 87280) fits many late model Ford truck and vans with 20mm bolts. With this kit you can adjust caster up to +-2.0deg. California Residents WARNING
SPC Performance 2 deg. FORD CAM/CAS SLV - 23108
$23.87
Change camber,caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve...
SPC Performance 1 deg. FORD CAM/CAS SLV - 23104
$23.87
Change camber,caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve...
SPC Performance 0 deg. FORD CAM/CAS SLV - 23109
$23.87
Change camber,caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve...
SPC Performance CAM/CAS WRENCH - 88325
$34.29
This unique camber and caster adjustment tool fits full size RWD Ford vehicles. Starting in the early 90's Ford RWD vehicles require rotating a separate cam for each angle adjustment. To adjust...
SPC Performance 1/2 deg. FORD CAM/CAS SLV - 23102
$23.87
Change camber,caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve...
SPC Performance 3/4 deg. FORD CAM/CAS SLV - 23103
$23.87
Change camber,caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve...