ALL NEW JLT SERIES 2 for 2011-2014 Mustang GT 5.0 and 2012-2013 Boss 302
Have an aftermarket manifold like a Boss or Sniper? Then this is your cold air intake!
This new kit was designed from the ground up to work with today's aftermarket manifolds and throttle bodies.
Released back in 2010, our original kit has worked great on the 5.0 for over 7 years. With the release of the BOSS and now the Holly Sniper along with 85 and 90mm throttle bodies we decided to do a redesign to accommodate these different sizes and angles.
The all new JLT Series 2!
BIGGER, BADDER and still the BEST!
Designed to fit and work with the stock manifold as well as the BOSS and Holley Sniper.
It starts with a 4" opening at the throttle body to match up to those 90mm units. The kit comes COMPLETE with 2 couplers. One 4" straight for the 90mm and a 4-3.5" reducer for the stock unit.
Next is the perfect 112mm MAF housing. Up from 107mm on the original, but not so big to cause drivability issues. Oh and the MAX allowed in NMRA Coyote Stock racing.
At the MAF you attach our one off designed S&B filter. A massive 5" at the inlet with a full radiused bellmouth to huge 1" deep pleats, this thing flows tons of air.
Finally all this sits in our own designed Roto Molded heat shield that utilities the factory fresh air inlet to get you the most cool air possible.
Finish it off with a silicone coupler and stainless clamps and you got the BEST Intake on the market!!! NO METAL TUBING HERE!!
MOLDED IN MAF
It’s a full 112mm ID at the MAF area
MAF is rotated to the inside or engine side of the tube for a more pleasing smooth look
Includes roto molded plastic heat shield to block engine heat at idle and low speed.
It incorporates the fresh air inlet from the grill.
It uses a large area to make sure the filter has tons of cool air.
• JLT Intake Tube with Black Textured finish
• 4" Silicone Coupler for aftermarket throttle bodies
• 4-3.5" Silicone reducer for stock throttle bodies
• 5x7" S&B Powerstack Air Filter
• Roto molded Heat Shield
• HD Clamps, 2013-14 hood insert plug & all needed hardware
The design and detailed instructions help make this kit an easy install (see Instructions & Videos tabs to download / view).
GAINS AND TESTING
30-35 RWHP from stock with custom tune (gains from both tune and intake)
2-4 RWHP over our original JLT CAI on a stock GT
8-10 RWHP over our original JLT CAI on a BOSS!
10-14 RWHP over our original JLT CAI on a modded GT
We have tested this on three different cars with different stages of mods and all gained over the original kit. See test videos on "Video" tab
A JLT specific tune is required with this kit.
AIR FILTER OPTIONS - OIL OR DRY
We use only the best air filters made by S&B to our specifications.
For years we only used oiled filters, but dry filter technology has been proven and is now a popular option.
Should I choose a Dry Disposable or Cotton Oiled Filter?
Since you are not sacrificing performance with either choice, the decision comes down to would you rather throw away the filter or clean it.
Dry: Comparable airflow to oiled cotton filters with the same great protection.
Last for up to 30,000 miles of highway driving. Extend the life of the filter using compressed air.
Oil: Oiled filters can last forever as long as you properly clean and re-oil it.
See picture of filters below. Oil filters are available in red or blue and Dry filters are white.
To properly clean your oil filter, we recommend the S&B Precision II Cleaning & Oiling Kit.
*TIP* by purchasing a 2nd air filter you can simply swap filters when it's time to clean it and not be rushed. Clean the first filter and it's ready when it's time to change again.
JLT Pre-Filters are now available for most intake kits we carry, these filters are made for us by Outerwears, these prefilters are water repellent. They will increase your filter life and cut down on your cleaning intervals! For more information check the product page here JLT Air Filter PRE FILTER
2013-14 owners:, KIT INCLUDES OUR WATER BLOCKER PLUG INSERT FOR NO WORRIES ABOUT WATER GETTING TO THE FILTER.
*This product is NOT CARB (California Air Resource Board) Exempt. It is not for legal sale or use in the state of CA or any other states adopting CA emission standards and require a CA Executive Order (EO) number. Any orders placed for this item with a CA ship to address will be cancelled.
Learn About Our Easy Returns
All Warranties on this part are the Manufacturers. The Seller Unleashed Tuning LLC hereby expressly disclaims all warranties, either express or implied, including any implied warranty on merchantability or fitness for a particular purpose, and Unleashed Tuning LLC neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of the part. This disclaimer by the seller, Unleashed Tuning LLC in no way affects the terms of the manufacturers warranties.
Parts can only be returned within 30 days of purchase and must be accompanied by the original invoice. There is a 15% restocking fee on all returned parts and canceled orders that have been processed. No refunds on parts that have been Installed/used, Special order, Electrical parts, HPTuners credits, Custom vehicle calibrations or software. Freight charges are not refundable. No refunds after 30 days. We are not responsible for damage or loss in transit.
To initiate a return, a Return Authorization Number (RA#) must be requested within 30 days of receipt of the product. When shipping the return, this RA# must be clearly labeled on the package. Items returned without an RA# are not eligible for refund or exchange.
Canadian Orders are eligible for a return or exchange subject to the above conditions. Eligible returns and exchanges will not be refunded the cost of shipping on the original order. Duties and taxes paid on the original order must be must be refunded through the Canadian Border Services Agency (CBSA). A link to the required B2G form and CBSA instructions to request a refund of duties and taxes is below.
CBSA Duties and Taxes Refund
International orders are not eligible for return or exchange, unless in the case of manufacturer defect or Unleashed Tuning error.
1. Contact an Unleashed Tuning Customer Care Specialist at email@example.com
2. Our Customer Care Specialists will provide you with an RA#, and email you detailed return instructions.
3. Clearly write and/or affix the RA# on the package and return to the address specified in the email.
4. Unless the return is due to manufacturer defect or Unleashed Tuning error, the customer is responsible for return shipping costs. For your convenience, Unleashed Tuning offers discounted return shipping labels. Should you choose this option, the cost of the label will be deducted from the refund amount.
5. The original method of payment used to place the order will be credited the purchase price, excluding return shipping costs. Unleashed Tuning will send a confirmation email once the refund has been issued. Please allow 5-7 business days for your bank to process the credit.
If you receive an item that is broken or defective, Unleashed Tuning will provide a prepaid return shipping label. To obtain the return shipping label, follow the above return procedure.
There is a 15% restocking fee on all returned parts and canceled orders that have been processed. These items qualify for a refund, less the restocking fee and any return shipping costs, when returned with all original packaging, paperwork and parts in new and unused condition.
No refunds on parts that have been installed/used, Special order, Electrical parts, HPTuners credits, Custom vehicle calibrations or software. Freight charges are not refundable. No refunds after 30 days.
"Large Print" Disclosures
Authorized items must be returned with all original packaging, paperwork and parts in new and unused condition. Items not returned in the above condition will fail inspection and a refund will not be issued.
Unleashed Tuning may issue a refund in good faith prior to receiving the returned item. We reserve the right to rescind such refunds if the item fails inspection upon arrival.
Unleashed Tuning will not compensate for damages incurred during product installation or use, nor reimburse labor charges or installation fees, under any circumstances.
Contact an Unleashed Tuning Customer Care Specialist at firstname.lastname@example.org. We will provide you with an RA#, which is required for all returns, and email you detailed return instructions.
Can I exchange an item?
Yes. Items that include all original packaging, paperwork and parts in new and unused condition may be returned for exchange. Simply follow the standard Unleashed Tuning returns procedure.
Will I have to pay a restocking fee?
There is a 15% restocking fee on all returned parts and canceled orders that have been processed. These items qualify for a refund, less the restocking fee and any return shipping costs. As with all returns, these items are subject to inspection before a credit is issued.
Who pays for return shipping costs?
If the return is due to manufacturer defect or Unleashed Tuning error, we pay for return shipping. Otherwise, the customer is responsible for the cost of returning the item. In this case, we encourage you to take advantage of our discounted return shipping labels. Ask your Customer Care Specialist for details.
What should I do if I received the wrong item?
First, verify whether the item you ordered is the item you actually received. Simply compare the part number on the shipping receipt to the part number on your email order receipt.
If the numbers do not match, we may have shipped the wrong part number. Just contact us at email@example.com. We'll process your return, exchange the item for the correct part (if available) and send you a prepaid UPS shipping label for your return item.
If the numbers do match, you may have ordered the incorrect part number. Once again, please contact us at firstname.lastname@example.org. We'll process your return and exchange the item for the correct part (if available).